Marijuana Growing In Your Closet!



This diagram shows how a closet can be separated into two sections. The smaller bottom section is lit 24 hours and holds the Mother plants and cuttings, you may use fluorescence. The top section holds flowering plants in a 12 hour cycle, and is lit with a 250 or 400 watt MH. Using a fast maturing variety six to eight weeks max, Expect to harvest 6-7 crops per year!



An old fridge in the garage or basement works great. Hydro setups and CO2 can easily be incorporated This setup has six plants but can hold up to 12!. Each plant will produce up to an ounce every 6-8 weeks!


This guide will help the new or experienced closet grower set up a simple space, at least 2 ft by 4 ft and 5 or more feet tall, into a private Ganja Farm. You may use an existing closet, a movable box type closet, or even an old fridge works great. Divide the closet into two light proof sections, one smaller than the other, if you use a fridge this is perfect.

For lighting you will need at least one set of 4 ft fluorescent tubes and ballast for Vegetative growth.
You also need a 250 or 400 watt Metal Halide bulb and ballast for your flowering period.

You will need a small fan to remove air from your closet and to gently blow the plants when the lights are on. this is to keep the room cool (25*C) and supply fresh CO2.
This can be a fan sucking air from the room or an exhaust fan that draws air outside the grow room.
The first crop will take 3 months from seed to harvest. Make sure you have good seeds suitable for indoor growth, and only use seeds from the most potent marijuana.
If you can get cuttings from a growing friend then you are a step ahead.
Start seeds directly in peat pots or your soil/soil less mix, under 24 hours light from the fluorescent tubes. Tubes can be 2 inches from seedlings.
Grow your plants for 3 weeks fertilizing after the first set of leaves show.
Miracle Grow or any complete 20-20-20 fertilizer should be fed in a weak solution with every feeding. Organic fertilizers are also recommended. Be very careful not to over fertilize.
After three weeks transplant the plants into larger pots (or rockwool cube in hydro setup).
Then place plants under 12 hours lighting from the Metal Halide.
Whether your 12 hour light cycle is in the day or night is up to you. But make sure that you can take care of watering and caring for your plants in the light! Do not interrupt the Dark period. This will delay the flowering process and it will take forever to complete.
About a week after you start the flowering process you will spot males with small green pods that hang. Remove them only when you are sure that they are males. They are not garbage, in fact the males are quite potent before the females reach their max potency!
Harvest the males just before they release pollen. The females will become evident as they will grow bushy, producing many white pistils. They will grow more and more bushy and develop a main cola. Don't prune, bend plants if they grow too tall. Select a fast maturing variety such as Alaska or Skunk #1.
But how do I get 5 or even 6 or 7 crops per year? you ask...

After your first harvest, Select your best female for potency, vigor and early flowering. Don't just pull plants from the roots, leave the bottom 3-4 branches and a few flowers. Revert your prize female to vegetative by placing it under a 24 hour light cycle. After a few weeks several fast growing shoots will appear, these are perfect for taking cuttings from your plants.
Take several 3 inch cuttings and root for 3 weeks under 24 hours light. Keep the original Mother alive for future clone crops. Keep clones in the vegetative cycle for 3 more weeks, then place in the flowering section (12/12 regimen).

Now you can have a crop every 6-8 weeks, depending on the variety you grow!
While you wait for flowering to complete, you take another set of clones from your mother which is kept in 24 hours light always, and by the time they root and grow somewhat the flowering crop will be ready to harvest. This is how you keep your flowering room constantly producing buds with no down-time in-between crops!

DO-IT-YOURSELF C02 GENERATOR (for your closet operation)

Every green leafed plant uses carbon dioxide in its daily life. 0.5% of our air is carbon dioxide. Plants are able to utilize up to 5 times the natural amount and can grow 5 times faster - provided that sufficient light, nutrients, and water are available to support the extra growth. Generally speaking, a plant will grow faster with added carbon dioxide in its environment.

Yeast is a living, eating, breathing and reproducing organism. They consume sugar and water and excrete carbon dioxide and alcohol. Yeast is used in the production of alcohol. Buy some brewers yeast at a make-your-own-beer/wine store. You will have to get a large jug with a small mouth, a rubber cork with a hole in it that will fit in the mouth of the jug, and six to ten feet (your decision) of flexible tubing in which the carbon dioxide will travel. All of these can be found at the one store. You are basically reviving the dry yeast in the package so that they will eat the sugar you give it and produce carbon dioxide meanwhile. Ask the person at the store that you want to produce carbon dioxide for some house plants. They will give you what you need.

1. Fill the large jug with slightly warm water. Not hot, not even warm, just a bit warmer than lukewarm. The warmth wakes up the yeast.
2. Now add sugar to the water . One part sugar to every five parts of solution.
3. Empty the packet of yeast in the jug and stir.
4. After a few hours the yeast should be active and producing carbon dioxide. The production of carbon dioxide can be observed by actual bubbles floating to the surface.
5.The only thing you have to do now is maintain the life of your yeast population. Dump out some of the solution and add fresh water so that is does not become stagnant. Add a few teaspoons of sugar. Do this every week or two.
6.Theoretically, your yeast population can last for an eternity!

Continue reading here: Marijuana tolerance break

Was this article helpful?

0 0

Readers' Questions

  • ren
    How to grow one weed plant in a closet?
    1 year ago
    1. Select a suitable container that is large enough to accommodate the root system of the weed plant.
    2. Fill the container with a nutrient-rich soil that drains well.
    3. Plant the weed seed and cover it with a light layer of soil.
    4. Place the container in a closet and water the seed lightly.
    5. Keep the seed moist and provide indirect sunlight. An LED grow light can be used to supplement light.
    6. Monitor the growth of the weed plant and water it as needed.
    7. Prune, fertilize, and harvest the weed plant when it is ready.
    • filiberta
      How to grow weed plants in a closet?
      1 year ago
      1. Choose a location: Select a closet in your house that is out of the way and has good ventilation. Make sure the room has at least one window, so it can get some natural light.
      2. Set up your grow space: Line the walls of the closet with mylar reflectors to maximize the light given off by your grow light. Use an oscillating fan to circulate the air and a timer to turn the light and fan on and off.
      3. Install a grow light: Purchase a grow light and install it in the closet. Make sure that the light is set up to be adjustable, so you can move it up or down as your plants grow.
      4. Prepare soil: Preparing the soil is an important step in growing cannabis. Choose a soil mix with a high content of organic matter such as perlite, vermiculite, or coconut fiber.
      5. Plant your seeds: Before planting your seeds, you will need to germinate them. This can be done by soaking the seeds in a cup of lukewarm water for 24-48 hours before planting.
      6. Monitor moisture levels: After planting the seeds, keep an eye on moisture levels in the soil. If the soil is too dry, mist it with a spray bottle. If the soil is too wet, let it dry out for a few hours before misting again.
      7. Harvesting: Once the plants have flowered and the buds appear, it is time to harvest them. Cut the buds off the plant and hang them upside down to dry. Once the buds are dry, you can then trim, cure, and store them for later use.
      • Ariam
        How to grow indoor weed in the closet?
        1 year ago
        1. Purchase the right type of grow lights. Make sure to purchase grow lights that are specifically designed for plant growth, as traditional lighting fixtures won’t be sufficient. Fluorescent bulbs are best for seedlings, while metal halides or high-intensity discharge (HID) bulbs are best for mature plants. You’ll also need to purchase a timer to ensure your plants get the correct amount of light.
        2. Get an air-tight grow tent. Invest in an air-tight grow tent to contain the light, odors, and heat of the grow space. It should also have a reflective lining to increase the efficiency of your lights.
        3. Install a carbon filter. To keep the smells from your grow area from escaping into the rest of the house, install a carbon filter. These are usually placed in the exhaust fan in the grow tent.
        4. Get a fan for ventilation. After you’ve got your grow tent sealed up and your carbon filter installed, get a fan and ducting system to keep the air circulating.
        5. Invest in a good soil mixture. Soil can vary widely in terms of the quality and the results it will produce. Invest in a good, organic soil mixture specifically designed for growing marijuana.
        6. Keep the area cool. Make sure to keep your closet area cool enough so your plants can thrive. A temperature of around 70-80 degrees Fahrenheit is ideal.
        7. Monitor your plants’ growth. Make sure to monitor your plants to watch for pests, mold, and other issues that could arise, as well as to ensure you’re providing them with the correct amount of light, water, and nutrients.
        • ugo
          How to grow weed indoors closet?
          1 year ago
          1. Choose the right space: Select a space in your closet that is spacious enough to accommodate all of the necessary equipment. Make sure there is access to power and that the room can be well ventilated (like using a fan or air filter).
          2. Prepare the space: Before you begin planting, you will need to prepare the closet by making any necessary repairs, painting, priming, adding insulation, and replacing any fixtures.
          3. Set up the equipment: Choose the necessary equipment (grow lights, grow tent, temperature and humidity gauges, nutrient system, carbon filter, etc.) to set up your indoor grow room.
          4. Install the lighting: Install your lighting system, making sure to follow the necessary safety protocols and to adjust the lighting levels as needed during the grow process.
          5. Plant the seeds: Plant your seeds in a nutrient-rich soil and in the containers that you have chosen.
          6. Water and monitor plants: Monitor your plants and water them as needed throughout the growing process.
          7. Harvest: Once your plants are mature, you can harvest them and enjoy the fruits of your labor!
          • Caramella
            How to grow weed in your closet?
            1 year ago
            1. Determine the strain of cannabis you want to grow.
            2. Gather all the supplies you need. This includes lighting, ventilation, soil, and containers, as well as seeds or seedlings.
            3. Choose a suitable closet space. Consider the size, lighting, and ventilation of your chosen closet.
            4. Set up your space. Install your ventilation system, lighting equipment, and any other necessary equipment.
            5. Plant your cannabis. Plant your seeds in your soil and water them according to instructions.
            6. Monitor your plants. Monitor the growth of your plants, the temperature and humidity of your closet, and any pests that may be present.
            7. Harvest and dry. When your cannabis is ready, harvest it and dry it according to instructions.
            8. Store your cannabis properly. Store your cannabis in an airtight container away from direct light and heat.